Chainsaw Sharpening Review Guide: Kit,Tools, Electric, Machines & Equipment

When you are using a chainsaw fairly frequently, it’s important that you know how to sharpen it so that it functions properly for you and gives you the results that you need. Chainsaw sharpening is essential and knowing exactly how to go about it can make a difference to the work that you do and the quality of the cut. For a thorough guide as to how to sharpen a chainsaw correctly take a look at this website, it explains every procedure that you need to undertake and gives you a video that you can watch that explains the sharpening technique for you.

Having the right kit

When you’re about to sharpen your chainsaw, you are going to need a chainsaw sharpening kit, there are many different kits that you can choose from but a particularly good one is the Oregon  Chainsaw sharpening kit, that comes with a 5/32 inch file diameter as well as an assembled file frame amongst other tools. This sharpening kit is great considering its low price and works very well, constantly ensuring your chainsaw works just as well as a new one.

The Eze-Lap sharpeners CSK chainsaw sharpening kit is a little more expensive than the Oregon sharpening kit but this is because it comes complete with a charger that you can plug into the cigarette lighter in your car. With a seven inch cord and a plug, you will have a chainsaw sharpening kit that will go wherever you want to take it, and it can easily be stored inside your car and taken out when it’s needed. The only downside to this chainsaw kit is that it could drain your battery if you use it too much, but as it doesn’t have a very high voltage, the chances of that are quite slim.

See also  Primatech Nailer Review: Hardwood & Pneumatic Nailers Guide

Forgetting the kit but choosing the tools

Rather than looking for an entire sharpening kit, you may just be in need of some chainsaw sharpening tools, and these are fairly easy to get hold of. The Dremel 1453 chainsaw sharpening attachment works very well and comes with three different sharpening stones and is compatible with nine different Dremel saws. The bonus is that these tools can be fitted to many attachments so that if you are not able to have easy access to electricity then you can simply add them to a rotary tool that will help you sharpen your chainsaw.

The Milescraft 2001 Chainsaw sharpening bit for rotary tools comes with two four millimeter tool bits so that you don’t have to buy a whole bundle of tools that you don’t need right now. These rotary tools have been diamond covered which means that they last a lot longer than some of the other rotary tools out there thanks to the added durability the diamond provides. These rotary bits make sharpening so simple and a lot faster, but they must be used with Milescraft chainsaws or other saws that are similar, otherwise they won’t do the job properly.

Making life easier

Electric chainsaw sharpening is preferable to sharpening your chainsaw manually, some people like to send their chainsaws away to be repaired and in some cases they may even remove the chain and replace it with a new one. Thankfully you do not have to go to these lengths because you can sharpen your chainsaw and save a lot of time. The Electric chainsaw sharpener 85 watts can be found here and it may give you a bit of an idea as to how much easier it us to use an electric chainsaw sharpener. This sharpener is fairly easy to use and a wide variety of chainsaws can be sharpened without much trouble.

See also  Topcon Laser Review Guide: Systems, Parts Scanners & Transit Advice

The Oregon bench-mounted chain grinder is an excellent hydraulic chainsaw sharpener, and although it is a bit expensive, you can be sure to get value for your money. This particular grinder/sharpener comes with a wheel that has three different thicknesses and is suitable for chains that range from one quarter of an inch to 0.4 inches thick. Knowing you have a chainsaw sharpener that works as effectively as this one can be somewhat of a relief if you have struggled to find a sharpener in the past, or you have not been satisfied with how your sharpener has worked. A downside to this particular model is not the machine itself, but the instructions that come with it, if you are experienced when it comes to using sharpeners then you should not have a problem.


The right chainsaw sharpening machine

Finding the right chainsaw sharpening machine is essential, particularly if you use your chainsaw frequently and you want to keep it at its best. You can find a wide range of chainsaw sharpening machines here and they are all made by Oregon who sell most of the world’s chainsaw sharpening equipment, simply because of the high standard they insist every one of their products has. Buying your sharpener from here can work out to be cheaper as there are often price cuts.

Getting the angle right

When it comes to sharpening your chainsaw you need to make sure that it is set at the correct angle. Failure to do this will result in a bad cut that you may have to alter again and again. A bad angle can also put strain on your chainsaw and stop it from working effectively. The PFERD 25 to 30 Degree Angle is an extremely cheap product and will work hard for you to make sure that you constantly get the angle that you need. Because of the cost, this angle may not be suitable for all chainsaws and it is recommended that it is only used on those that have a plastic handle, but it does its job effectively and can let you cut the wood that you need without compromising on quality and indeed safety.

See also  Plasma Cutter Reviews: Including Miller Plasmas, CNC plasmas, Gianttech Plasmas and Lotos Plasma Cutters


Always make sure that you have access to sharpening equipment that works well and lets you do the job in hand. Remember a sharp chainsaw that cuts at the angle you need will save you a lot of time and effort while ensuring your job is well done.

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.