TopToolTips.com
Guides & Buying Tips For The Tool World!
  • Compensation Disclosure
  • Contact Form
  • Copyright Notice
  • Disclaimer
  • Privacy Policy
  • Terms and Conditions

Category: Misc Tools

Reviewing Garage Storage Solutions: Different Types, Make Your Own, Overhead Garage Storage, Garden Tool Storage.

Posted on March 6, 2012 by James BentleyLeave a comment on Reviewing Garage Storage Solutions: Different Types, Make Your Own, Overhead Garage Storage, Garden Tool Storage.

Finding the right type of garage storage solution can be difficult, and it can leave you with a mess in your garage or a lot of different types of storage that make the place look just as untidy as before. For a great storage system that is guaranteed to make a huge difference to your garage, I can recommend the UltiMate garage storage system that comes with 10 different units. It is quite expensive and is sold for just over $1,700 but you end up with a great looking storage unit that has so much room you might be hard pressed to find enough tools etc. to fill it. You do have to assemble the unit yourself which could take some time, so you may need someone else’s assistance, but once you have the storage you need you will be pleased with your effort.

The Inter-lock three shelf storage system that includes 3 shelves and 1 large and 1 small cabinet is much cheaper than the UltiMate garage storage system, it is smaller but it can hold a lot of tools and more so you can have a tidier garage that also has a clean and modern look. At a cost of about $390, these units are a lot easier to assemble because they interlock, so the screws and nails you usually have to deal with when you’re building storage systems are non-existent, and it makes the whole unit pretty strong too.

Make you own garage storage solutions

if you need some ideas about constructing your own storage systems then you don’t need to be an expert, you can make garage storage solutions yourself and if you need a bit of inspiration and help then this site might be able to give you what you need. It can help to give you some great ideas, and if you think that it all looks a bit too complicated or that you may not have the time then do not worry, it can help you decide what storage solutions you would like. Remember that it’s important to have a tidy and safe garage and if this means you have to pay cash to get it that way, that’s fine, especially if you end up very happy with the way it looks.

Popularmechanics.com is a pretty good website, it comes up with some quite novel storage solutions that you may not have thought about before and it tells you a bit about how the storage systems work, what they do and how strong they are. If you are still looking for ideas then this could be the site that helps you.

Types of garage storage solutions

There are a lot of different types of garage storage solutions and they can all be found right here this website is quite good because it goes into good detail about the specific types of storage you can get and it may help to inspire you if you are a bit stuck for ideas. You may just be thinking about different shelving units and cupboards but you can also find storage systems for bicycles and overhead storage systems too, which can save you even more space.

Storagesolutionideas.com is a good website to check out too, and it goes into quite a bit of detail that may prove to be handy. You should be prepared to be reading for a while as the site seems to go into every aspect of storage, but again, if you are short of ideas, then it’s worth reading it.

Overhead garage storage

Earlier I talked very briefly about overhead garage storage systems, and how they can save a lot of room. If this is an idea that appeals to you then the MonsterRAX overhead garage storage rack, could interest you. For approximately $250 you get a very strong system that can hold up to 600 pounds in weight, and you also have the opportunity to vary the drop, from 18 inches to 33 inches, depending on the amount of room you have spare. Storing something overhead means the material that holds your goods needs to be string and this storage rack is just that, made from industrial strength steel, you can be sure that whatever you store is safe and secure.

For a cheaper solution, the Hammertone 45 inch by 45 inch overhead storage system can work well for you at just $60. It can hold 250 pounds in weight and is made of steel wire that has been powder coated to give it extra strength and versatility. If you want to get the things that you store down easily, then you should think about putting the two shorter bars that come with the system, at the bottom, that way your things are easier to reach. You also need to make sure that you don’t over-tighten the screws as this could cause problems; you just need to find a happy medium and make sure the unit is tight enough, without in damaging the bars, while being strong enough to hold the things you store.

Garden tool storage

If you’re a bit of a gardener then you may be thinking about some garden tool storage, the Rubbermaid deluxe tool tower rack is a particularly good system and it even comes on casters so you can wheel it around if needs be. Holding up to forty tools, this rack can save you a lot of room. You may wonder if this tower rack is strong enough to hold that many tools and I can assure you it is and that the casters make it easy to maneuver around too. At just under $50, you will get a great deal for your money.

The Holeyrail Garage Organizer is excellent if you want to hang your tools up on the wall, not only is this a great way to keep your garage tidy, but it saves a lot of room too. With the capacity to hold up to 600 pounds in weight and a very easy installation process, this organizer is affordable (Sold for about $25) and easy to use, both indoors and out. You should be aware that the required ‘Pegs’ to build this system are not always included with the product, and you may have to buy them separately, so it’s always worth asking if they come with the Holeyrail Garage Organizer that you’re thinking of purchasing.

 

Posted in Misc ToolsTagged Garage Storage Solutions, Garden Tool Storage, Overhead Garage Storage, Types Of Garage Storage Solutions

Bottle Cutter Reviews: Kits, DIY, Patents and Prices

Posted on March 3, 2012 by James BentleyLeave a comment on Bottle Cutter Reviews: Kits, DIY, Patents and Prices

A bottle cutter can help you to create a wide range of crafts that can be used around the home and elsewhere. The Generation Green (G2) bottle cutter is a reasonably priced tool that will let you cut bottles as well as jars that hold up to a maximum of 5 gallons. You can easily score the bottle that you want to cut and the makers of this product have come up with a good way of helping you to easily separate the bottle and the piece you want removed.  The glass cutter attachment has been known to break off or become damaged, but they are very easy and cheap to replace. This product usually costs between $18-25 and could prove to be very useful in helping you to create the crafts that you want.

If you’re looking for a bottle cutting kit then you might want to consider Ephrem’s bottle cutter deluxe kit, as it is not as basic as the G2 bottle cutter, the kit compromises of a strong bottle cutter that is made from metal, a bottle neck adapter than you may or may not want to use, an instruction booklet and a few extra pieces such as a candle, to help you with your designs. Bottle cutters help you to create the pieces that you want and you aren’t just limited to cutting the ends of them and inserting a candle. There are so many things that you can do, and this bottle cutter will help you to achieve your goals. Make sure that you buy this deluxe kit from a trusted website as there have been complaints from people who have paid for the deluxe kit and received the basic one. With a price of about $35, the deluxe kit is a little more expensive than some, but it does come with a few added extras that might please you.

A glass bottle cutter with some added extras

if you’re looking for a glass bottle cutter that comes with a few extras then the Armour Bottle and Jar Cutter might be what you need, this cutter sells for about $27 and with it you will get a reference guide, sanding sheets, two cutting wheels and so much more. This is a good glass bottle cutter that will help you to make use of the bottles that you have lying around, and help you to feel that you’re doing your bit for the environment. There have been a few disappointing customer reviews stating that this bottle cutter does not score properly, but there have also been a few happy customers who have never had a problem. When you come across a negative review or two, it might be worth your while looking elsewhere to see what other people say about the product, so you get a good idea about whether or not you think the Armour Bottle and Jar Cutter is worth the money.

For an extensive look at how a bottle cutter works, you might want to refer to this page as it serves as a guide and can help you out if you are stuck, or you just want to know a bit more about cutting bottles. The bottle cutter used here is part of the Ephrem’s bottle cutter deluxe kit, but a lot of the kits you can buy are fairly similar, so it shouldn’t make too much difference. Because it contains photographs and an easy to read guide, you should be able to determine whether or not bottle cutting is something you are interested in, and it also serves as a bit of an advertisement for the bottle cutter than is featured.

Your new bottle cutter kit

A bottle cutter kit is what you need to help you to get started and the Generation Green Luminary Bottle Art Kit will probably be the kind of thing you are looking for. This kit can help you to brighten up your home, work space or help you to make gifts for other people, and is priced from $9.99 to $19.99 depending on where you shop. Although this is not the most expensive kit, it is a pretty good one; you will however be disappointed if you expect this bottle cutting kit to contain a bottle cutter.  The Generation Green Luminary Bottle Art Kit markets itself as being suitable for bottle cutting kits, and could be a bit misleading at first site.

 

Safely use a diy bottle cutter

For a bit of help and advice when it comes to using a bottle cutter, you might want to take a look at this site, it shows you how to use a diy bottle cutter and has clear photographs and explanations that make the entire process relatively easy to understand. This site also gives you a list of the tools you will need to do the job and complete it successfully.

 

Where to find bottle cutter patents

if you would like to have a look for a bottle cutter patent in case you have made one yourself and you want yours to be different from the rest then you should take a look at www.google.com/patents as this site will show you what patents already exist, giving you the opportunity to fine tune your bottle cutter so that it’s completely unique.

 

Comparing bottle cutter prices

if you are still serious about buying a bottle cutter and transforming used and old bottles into something quite artistic and helpful, then you may be interested to know that you can compare bottle cutter prices. A good number of products are listed here and you will get the opportunity to see what you could be charged for a wide variety of bottle cutters. Shopping around always pays off, so it’s vital you have a look and compare the prices and the products before you hand over your cash.

 

Posted in Household DIY, Misc ToolsTagged Bottle Cutter, DIY, Kits, Patents, Prices

Nolreco Replacement Blades Product Review: Including hq9 & hq6 Shavers.

Posted on February 20, 2012 by James BentleyLeave a comment on Nolreco Replacement Blades Product Review: Including hq9 & hq6 Shavers.

Depending on what make your Philips razor is, you should easily be able to find the replacement blades that you need. You must be aware that not every blade will fit every razor as the razors come in different shapes, sizes and are used for different styles and methods of shaving.

Replacement blades are very widely available but you will need to take a close look at the razor you wish to find the blades for, so you are aware of the specification and model number before you purchase the replacement blades that you need.

The Philips Norelco HQ8 Spectra Tripleheader Replacement Heads are excellent blades that fit the Norelco Spectra Razor and cover most of the 7000 series and the 8800 series of razors. The razors claim to last an entire year without having to be replaced, but if you have a beard that you like to trim frequently then they may need replacing a little more often.

If you’re looking for a quick shave then the Philips Norelco HQ9 SpeedXL Replacement Heads may just be what you are looking for, they are compatible with the SpeedXL and SmartTouchXL  razors and can give you the very fast shave that want. These blades do the job very well with just one drawback and that is because the outer and inner rings have different speeds which can cause frustration and the length of your beard or stubble to be slightly uneven should you not have the time to run the razor over it.

To get more of an idea about the cost of the nolreco replacement blades and which razors they need to be used for, you should take a look at the Philips website as it will go into greater detail.

Personal Care

Finding the right norelco shavers when it comes to your personal care is so important because it can help you get the look that you want. The Norelco Speed 8240 is perfect for a smooth and close shave that won’t take long to get rid of your unwanted hair, but because the blades are shorter than some of the other models it can prove difficult to use at first.

The Norelco 7310 is one of the cheapest shavers you can find in the Norelco range and although it does not promise very smooth or fast shaves, it is a very good razor that delivers its promises. The Norelco 7310 does not look like a cheaper model and although it is considered to be a ‘Budget’ razor it does the job properly and can be somewhat more reliable than the more expensive models.

Norelco shavers replacement blades

The Norelco Hq56/52 Reflex Plus replacement blades are suitable for use with the 6843XL despite being made for use solely with the hq55. If you do not shave every day, you can expect these blades to last a lot longer than the recommended six months, which can save you about $20 from time to time. You can expect the Norelco Hq56/52 Reflex Plus replacement blades to be hard to find however as they fit a razor that has been on the market for a number of years. Amazon.com proudly stock these excellent razor heads and they can be found here at a reasonable price.

A Really Good Shave

For a really good shave the Norelco hq8 Spectra and Sensotec replacement blades promise exactly what you want, they provide the user with a close and smooth shave without them having to replace the blades for a year at a time. These particular blades can be slightly more expensive and put people off buying them, but you get a great shave for your money thanks to the quality of this product.

Another high quality set of blades are the Norelco replacement blades hq9 that like the hq8 promise a close and smooth shave. The hq9 blades however are a bit more expensive but they are somewhat more reliable and shave just that little bit closer providing you with an even shave in a shorter amount of time. These blades work with a few of the 8000 series of Norelco razors as well as the SmartTouch-XL, and the Speed-XL sets too.

A Wide Selection For All

There is a wide selection of Philips Norelco replacement blades for everyone and you can be sure to find a razor that suits whatever style you are looking for and speed you prefer to shave with. There are varying prices and they all reflect the quality of the shave to a degree, you may be lucky and find a lower priced replacement blade that works exceedingly well for you.

There may of course be some difficulties in you try to use a replacement blade with a different razor as they are not all made to fit each and every one, but now and again you may just be lucky. There are cheaper replacement blades that come with a different brand name, but their performance will not be as good and you could in fact, end up damaging your razor permanently. It is therefore recommended that you always tick to using the Norelco replacement blades when you use a Norelco razor and shaving system.

Long And Short Hairs

Because our hair can often be of different lengths the Norelco replacement blades hq6 caters for this and it gives you the opportunity to switch between shaving long and short hairs at different times. After time the effectiveness of the blades is altered and you may need to replace the heads more frequently than is recommended on the packaging if you shave every day, but if you follow these guidelines you will find the Norelco replacement blades hq6 will work hard for you and give you the shave that you need without taking up too much of your time.

 

Finding the right razor for you is so important so you get the look and the level of comfort that you need and the right Norelco razor replacement heads can easily help your razor last for many years.


Posted in Misc ToolsTagged hq6, hq9, Norelco Replacement Blades, Shavers

Ingersoll Rand Air Tools: Impact Wrenches, Dryers, Half Inch Drives & Air Guns

Posted on February 19, 2012 by James BentleyLeave a comment on Ingersoll Rand Air Tools: Impact Wrenches, Dryers, Half Inch Drives & Air Guns

When it comes to using an air tool that is powerful and reliable then you might want to consider the range of Ingersoll rand air tools especially if you wish to do different types of maintenance work on any kind of vehicle. The Ingersoll Rand TiMAX 1/2-Inch air impact wrench is an extremely strong tool that can be used for hours at a time. It weighs just under four pounds, yet it can deliver the best ratio that you have seen in its class, an incredible 750 pound torque, which is yet to be beaten. The only downside to this air impact wrench is the price, but you do get what you pay for.

The Ingersoll Rand 2130 half inch heavy duty air impact wrench is another of the favorites in the maintenance industry, although it cannot give you as much torque as the TiMAX model, you may find the 550 pounds sufficient, and it’s certainly cheaper than the TiMAX too. For an impact wrench that does not deliver an phenomenal amount of torque, it is ok when it comes to handling, weight at just over four pounds can be a bit of a disappointment if you are used to the newer and faster models, but it works well for the price.

What about air impact wrenches?

When you are looking to buy or use some Ingersoll rand air impact wrenches then I can suggest you take a look at this website you will see that there is a wide range of air impact wrenches for you to choose from and they come in at different capabilities and prices that deliver a wide range of results. Getting the right wrench for the job is vital; if you choose one that is slow and has a lower torque then you could be wasting your time. Plus you need to find an air impact wrench that is comfortable to use for hours on end and is not too noisy. On the page that I have provided a link to is the opportunity for you to download a vehicle service catalogue that shows you the full range of Ingersoll products.

A range of Ingersoll rand air dryers

The Ingersoll Rand refrigerated air dryer 32 CFM is one of the most popular air dryers and it is appreciated by many because not only is it environmentally friendly by reducing its energy consumption when it’s output is less than the maximum cooling capacity, but it also works hard to ensure that the air is always dry and thus it helps to avoid damp and its associated problems. This is one of the smaller units on the market, and is not as powerful as some, yet it does do the job quite nicely and is self-contained. The small size (18 inches in length, 16 inches in width and 18 inches in height) means that not only is this one of the smaller air dryers, bit it’s relatively cheap too.

If you are looking for some bigger Ingersoll rand air dryers then it may be worth your while considering the Ingersoll Rand refrigerated Air dryer 106 CFM. Although this unit is not too much bigger than the 32 CFM air dryer it does have a bigger and better output and is able to be added to your air supply line and flow restriction can be reduced. This unit stands at 21.5 inches in length, 16.5 in width and 22.5 inches in height, providing you will a reasonably sized unit that delivers the dry air that you need without taking up too much room. This Ingersoll rand air dryer is a lot more expensive than the 32 CFM, but it does have  a better output.

 

Delivering the goods despite the size

Going back to the air tools, the Ingersoll Rand ¾ inch ultra-duty air impact wrench is ideal of you are looking for an Ingersoll rand ¾ in drive. It delivers an amazing 1200 maximum torque and weighs 7 pounds, making this particular impact wrench one of the fastest and strongest on the market, no wonder it’s so popular. If you are prepared to pay the price for this air impact wrench then you should go ahead, it can seem pricey, but you will receive an air tool that is second to none and even fits into small places which makes it so much better to use.

The Ingersoll Rand ¾ inch super duty air impact wrench is considerably cheaper than the previous model we looked at, but it still manages to deliver the goods. The maximum torque is slightly less at 1100 but and it does weigh an extra 5 pounds (12.4 pounds in total) but it’s still pretty fast and a valuable and reliable tool that should not be dismissed.

How about a ½  inch drive?

When it comes finding a small but powerful air impact wrench then you should consider the to the Ingersoll Rand TiMAX ½ inch, this is a very popular tool and for just under four pounds of weight you will get a maximum torque of 780, which is pretty good. Granted, it is not one of the most powerful but it is pretty good for its size and weight, and what’s more is it’s reasonably quiet too, meaning you can get on with your jobs and not be pestered by the noise that some air impact wrenches give you.

Last but by no means least, the Ingersoll rand air gun

The Ingersoll Rand TIMAX ½ inch titanium duty air impactool is incredibly popular thanks to its reasonable price and its ability to deliver a maximum torque of 780. In fact, it’s known to have the best power-to-weight ratio around and that quite something. This excellent Ingersoll rand air gun can be found here and weighs just over four pounds, meaning you can be sure to find it easy to work with while getting the jobs done quickly. There has been some disappointment in the past with regards to its torque rating, but the Ingersoll Rand TIMAX ½ inch titanium duty air impactool is a relatively small tool and this should be taken into consideration.

 

Posted in Misc ToolsTagged Air Guns, Dryers, Hlaf Inch Drives, Impact Wrenches, Ingersoll Rand Air Tools

Crescent Tools Review: Lifetime Warranty, Brand, Stanley, Craftsman and Company Guide

Posted on December 18, 2011 by Jeremy3 Comments on Crescent Tools Review: Lifetime Warranty, Brand, Stanley, Craftsman and Company Guide

Crescent tools have been a part of our lives for many years; you probably just didn’t realize it. If you were to go through your father’s or grandfather’s tool box, the probability of finding at least one Crescent tool is about 90%. The fact that it would still be in there, in good condition, is a testament to the strength, reliability and durability of Crescent Brand Tools.

The Crescent Tool Company began in 1907 by Karl Peterson in New York, New York. Peterson was an inventor of hand tools and worked with two other toolmakers before venturing out on his own. His first products were the Crescent pliers and wrench-pliers. But it was only when he introduced his version of the adjustable wrenches that people started to take interest in the company.

Nineteen years later Peterson, through Crescent Tool Company, bought the Smith & Hemenway Company and expanded their tool line. If you see any tool with a Red Devil logo, that’s from the company Smith & Hemenway.  However when S&H was purchased the Red Devil logo could not be used by Peterson, as it was the sole property of the S&H brand owner. The owner retained the rights to the name and used it in his new tool company, Landon Smith. The product line of S&H was far more extensive than that of Crescent Tool Company, so it was an ingenious business decision made by Peterson; with the purchase of S&H, he expanded his own line of tools without having to do the actual work himself, just the negotiations.

By the 1930, a new product line was launched: Crestology and a Do It Yourself (DIY) tool kit. Eventually, Crescent Tool Company was bought out in 1960 and became Crescent Niagara and 8 years later was acquired by Cooper Industries and is now part of their Cooper Tools division. Just last 2010, Cooper Tools tied up with Danaher Tool Group to form Apex Tool Group.

With a penchant for high quality, Crescent tools by Apex Tool Group managed to keep and maintain market share in spite of the presence of many competing companies. This trend was obvious in the early 1960s and is living up to its reputation for excellence today.

The Crescent Tool Warranty

The Crescent tools all come with a limited lifetime warranty, which means the company will replace the unit if there is manufacturing defect. That being said, tools are easy to use improperly, and it is more often the user’s error than that of the tool itself when a tool is damaged. To make a claim through your warranty, you will need to send it in and wait for the replacement. You can also direct your concern to the store you bought it from, if you can show proof of purchase.

The Crescent Brand Tools

Crescent brand tools are currently holding several patents on their innovative designs. Some of these Crescent brand tools with a patent are the sector cutting saw, adjustable wrench with tension spring, folding screwdriver, and several of the grips.

Of all their products, the most popular remains to be the adjustable wrench. If you are going to buy one, the 8 to 10 inch or the 6 to 8 inch adjustable wrench are very practical choices. However, there is the Crescent tool kit which should everything you would need for minor repairs around the house.

Crescent tools review from actual consumers has complained about the case where the tools are kept. It mainly borders around not having a secure lock so it’s easily opened. However, that being said, not one Crescent tools review has said anything negative about the tools themselves. For instance, the tool kit has a combination of metric and SAE tools. The kit itself is affordable and will last a lifetime of proper use. As a starter kit for young adults, it’s perfect.

What Makes Crescent Tools A Preferred Brand

Over the years, Crescent tools have maintained its quality. They are made of the best steel alloy, tempered for long-time use yet lightweight. They don’t stick and are easy to use. The wrenches are tough on the bite with outstanding grip so you don’t have to worry about slipping.

The standard Crescent wrenches cost from $13 to $24 each. They can be utilized for both professional and home use. Some of their features are:

  • Wide jaw and wide handle for easy grip
  • Tension spring for easy adjustments
  • Heat treated
  • Chrome-plated to prevent rusting or corrosion
  • Polished and stain-finished
  • The tapered handle wrenches range from $39.95 to $149 each. Their features are similar to the standard wrenches with the following additional features:
  • Proportion dimensions for minimum weight but greater strength which means it more for heavy-duty jobs
  • Handle is tapered for better two-handed grip

If the wrenches do get broken for any reason and the company will not allow replacement, it is possible to buy the parts. The usual parts of the wrench that will need to be changed are the jaw, spring, knurl, or pin. You can have your tool serviced or you can buy the part yourself and make it another personal DIY project.

Aside from the popular wrench, Crescent tools also cover pliers, cutters, nail pullers, wire stripper, nut drivers, screwdrivers, and clamps. The tool sets from Crescent tools are:

  • Set of adjustable wrenches
  • Set of Box Joint Dura Pliers
  • Set of Ratcheting tools
  • Set of Ratchets
  • Set of Locking pliers
  • Set of Pivot Head Ratcheting wrenches
  • Set of Rings
  • Set of Ratchet with socket
  • Set of Reversible wrenches

The Importance of Owning the Right Kind of Tools

Whether you are planning to take on a new project or something around the house suddenly goes puff, you will need tools. Buying substandard tools will not only make the job more difficult to work on, it could also cost you more money.

Not to put down other brands but the fact remains that Crescent technology, design, and craftsmanship would not have been on the market for more than 100 years if it didn’t work well. Companies would not have wanted the brand if they didn’t feel confident in adding to their product line. The fact that just last year the tools were targeted for a joint venture with another huge tool conglomerate must not be ignored.

Crescent Tools

Crescent tools have become part of most American households for generations. This is the brand your grandfather and father would recommend without hesitation, and it will probably be the brand you will recommend to your sons.  Among Craftsman tools and Stanley Tools, Crescent brand remains a heavyweight in the tools industry.

Posted in Misc ToolsTagged craftsman tools, crescent brand tools, crescent tool company, crescent tools, crescent tools review, crescent tools warranty, stanley tools

Echo Power Equipment Review: Prices, Parts and Dealers Guide

Posted on December 18, 2011 by JeremyLeave a comment on Echo Power Equipment Review: Prices, Parts and Dealers Guide

Echo Inc. has been in operation for more than 30 years, and since its beginning this company has been committed to making professional quality power equipment. Echo has been a global leader in the manufacturing and development of professional grade handheld outdoor power equipment. Some of the equipment of Echo Inc. has been listed below:

Echo Chain Saw

An Echo chainsaw is a very powerful piece of equipment designed to perform different tasks. From cutting fire wood to pruning or cutting down the whole tree – this Echo power tool does it all. Echo chainsaws are known to last long without causing trouble for their owner, durability and reliability being key factors in all Echo manufactures. These are also very dependable and user friendly; Echo chainsaws start easily without a whole lot of effort on the part of the operator, and they run very smoothly. In addition, this Echo equipment provides excellent performance with its 2-stroke engine. One unique feature about the chainsaws by Echo Inc. is that it uses Pro-Fire ignition system, which enables them to start in a very short time and still operate smoothly. Another interesting feature of these chainsaws is that they use vibration reduction technology which reduces the vibration of the equipment while using it, thereby decreasing the strain on the operator’s hands, arms, neck and back.

An Echo chainsaw comes with either of the two handle configurations – top handle or rear handle. The controls of this chainsaw is grouped which makes it easy to access all the functions of this Echo power equipment. All the chainsaws by Echo are certified for professional use and they have high useful life. In addition to that, you also have the option to buy Echo power equipment parts and accessories for to add to your chainsaw.

Some of the models available are CS-271T which comes with a 26.9cc engine, CS-310 with 30.5cc engine, CS-450 having 45.0cc engine and the chainsaw having the most powerful engine is CS-8000 with 80.7cc engine. You can get any chainsaw from one of many Echo power equipment dealers.

Echo Blower

The power leaf blower by Echo is an amazing equipment to blow away all the leaves from the yard. It quickly cleans up any yard making it look sparklingly clean. It comes in two configurations – backpack and hand-held. Its features are user friendly. Any regular person who is using it for the first time will not have any difficulty in using it as it is easy to use. The ProFire ignition system is makes it to start quickly and easily. The backpack models come with padded back-rests to provide comfort and straps to fasten it to the shoulder so that it stays in place. The Echo blower is fitted with special Posi-Loc tubes which secure the pipe connection, and the handles are comfortable to hold. The backpack model of blower comes with two types of throttles – tube mounted throttles and hip mounted throttles. Echo blowers are certified for producing low noise so it fits best to be used in those environments which are noise sensitive. The yard blowers from Echo Inc. have the ability to blow away the leaves at great speed, and it has the ability to move keep the blower moving.

If you are looking for Echo power equipment prices then you may approach the dealer who will give you a price list of the leaf blowers that you might be interested in. Some of the models of the leaf blowers are PB-250 and PB-255 both having an engine of 25.4cc; both are handheld blowers. If you are looking for the backpack models then you may choose from the different models that are available. Some of them are PB-265L with 25.4cc engine and i-30 starter, PB-410 that comes with a 39.7cc engine, PB-500H with a 50.8cc engine and PB-770T having an engine of 63.3cc which has tube mounted throttle. PB-460LN Quiet 1 blower from Echo, which comes with a 44cc engine, is ultra quiet at 65 decibels with patented sound attenuation technology.

Echo Hedge Trimmers

If you are looking for trimmer that gives superior performance then Echo has it. This Echo power equipment is the perfect one for home owners and professionals. The hedge trimmers come in single-sided blade and double-sided blade configurations. These trimmers are known for its reliability and toughness. It has some intelligent features like superior quality cutting blades which can even be used for the heavy applications, a throttle lockout which helps the blade from being engaged accidentally and commercial grade gear cases.

The engine mounts of Echo hedge trimmers reduce vibration and its handles are padded which provides comfort to the operator. The double-sided blade models from Echo have exclusive RazorEdge blades which have been cut by laser. This gives it a long lasting sharpness. Some of the models of Echo hedge trimmers are HC-150 with 21.2cc engine and 20” blade, HC-150i which has –i75 starter in addition to all the features of HC-150, SHC-225 having an engine of 21.2cc, blade of 30” and i-30 starter and SHC-266 having 25.4cc engine, 20” blade and i-30 starter. It has extra long shaft of 51” to reach out for longer areas. If any part of your hedge trimmer needs to be replaced then you must only get genuine Echo parts for your power equipment.

It is always advisable to read the reviews of the products that you intend to buy. You can read Echo power equipment reviews before you buy any power equipment from Echo as it will make you understand better the product that you want to buy. The reviews are made by those people who have already used the products so they will provide you with actual facts.

Echo also manufacture some other equipment like bed redefiners, brush cutters, chippers/shredders, earth/ice augers, edgers, engine drills, power pruners, pumps, shred N vacs, sprayers, tillers/cultivators, and various accessories for all the power equipment by Echo. All these equipment are known for its quality performance and reliability.

Honda Power Equipment

Apart from Echo power equipment, you may also choose to buy Honda power equipment. Honda is committed to create products that are superior in quality. Honda manufactures generators, lawnmowers, pumps, snow blowers, tillers, and trimmers. The equipment manufactured by Honda are reliable, durable and efficient. They are also conscious of environment. The engines of the Honda power equipment meet the emission levels set by U.S. Environmental Protection Agency, 2006. So if you are using these power equipment then you know that you too are contributing for the welfare of the environment around you.

 

Posted in Misc ToolsTagged Echo parts, Echo power equipemtn prices, Echo power equipment, Echo power equipment dealers, Echo power equipment parts, Echo power equipment reviews, Honda power equipment

Starrett Tools Guide: Punches, Combination Square, Catalog and Tools for Sale

Posted on December 18, 2011 by JeremyLeave a comment on Starrett Tools Guide: Punches, Combination Square, Catalog and Tools for Sale

Starrett Tools are known for providing high quality precision measuring instruments for the machining industry.  These tools are also highly valued by home machinists and tool aficionados.  The company got its start back in 1880 when the founder created the first Starrett combination square.  Since then, Starrett built up the company to manufacture and distribute this highly useful product for industry.  Over the years, the company grew and widened its product line to include other precision measuring tools.  Now, Starrett is well known for producing some of the best quality and longest lasting precision measuring tools.

The company also produces a line of saw blades under its power tool accessories and hand saws group, that includes a variety of hole saws, jig blades and reciprocating blades.

Excellent Service

Part of Starrett tools’ reputation comes from its excellent customer service.  Starrett tools will replace products that are defective or damaged from their manufacturing facilities.  They will not however replace products that have been damaged as the result of misuse or accidents that occur in the workplace. You should contact customer service for assistance with replacing a defective tool or if you believe that a tool was broken on purchase.

Starrett Tools has a longstanding repair and calibration policy in place for tools that the company has produced over the years.  Owners of these tools can take their products to a local Starrett approved distributor for repair and calibration service to get their tools sharpened and aligned properly.  The facilities that provide this service can be looked up online at: http://www.starrett.com/about/general-information.

At the time of production, Starrett tools meet or exceed the accuracy requirements of National and International standards and are traceable to the United States National Institute of Standards and Technology.  When tools are damaged and become inaccurate measuring instruments, the Starrett tool company is pleased to offer assistance with preparing those tools to restore their accuracy.  Simply contact the company for a price quote on repair services.

Custom Ordered Tools

Starrett Tools also allows customers to custom order tools designed to meet their specifications.  Customers will simply need to contact the Customer Service division or contact your local Starrett tools supplier for information on how to order their specialty products.

Typically customers will place their specialty orders with their local Starrett distributor.  Customers can provide drafting information and measuring standards for their product to Starrett customer service representatives through the distributor.  After a short period of time and if needed, testing of the new product to find the right specification, Starrett tools will produce as many versions of this special custom order product as is needed by the customer.

Occasionally, Starrett will offer customers with price quotes for cases of products. If the customer needs to purchase a lot of tools at once for their company or workers to use on site, they can contact Starrett for information about large purchases or to be directed to a distributor who is qualified to handle large orders for the manufacturer.

Prices of Starrett tools for sale and specialty order products can be obtained through your local Starrett distributor.  Starrett does not typically quote prices directly to their customers.  However, if a customer needs help finding a distributor in their area, they can contact Starrett customer service.

Some Product Lines

The Starrett Catalog currently includes five product lines, precision measurement tools, metrology, granite-based engineering tools, saw blades and job site and shop tools. These tools are all available to order through a Starrett distributer. The catalog is also online .

Grainger tools and McMaster Carr tools are both distributors of Starrett products. These companies both allow customers to purchase their tools through their websites. For instance, McMaster Carr sells sets of Starrett punches and individual punches for customers to purchase.

The punch sets typically include a wrench and four punches of different sizes. These sets are available with different punch sizes ranging from 1/2″-13, 9/16″-12, 5/8″-11, and 3/4″-10 to 4-40, 6-32, 8-32, and 10-24. Punches allow the user to quick and accurately punch holes of different sizes in a precise manner.

The Starrett combination square can also be purchased through Grainger tools too. Customers can purchase individual squares or multi piece sets of squares in different sizes. The two piece Combination Square set through Grainger costs $80.10. It includes a combination blade and square head with built in level and scriber. The square is made with hardened cast iron, so that it is certain to last a long time and can really take hot and cold extremes. Cast iron can also withstand a lot of hard work and take the nicks and bangs that come with using tools in a shop environment.

Caring for Starrett Tools

All Starrett tools are designed for regular work and designed to last through rough treatment. Proper case and use of these tools will help to ensure that they last a lifetime and can be passed on to children and grandchildren. In fact, many Starrett tools are treasured by the descendants of those that originally purchased them.

Don’t purposely toss, drop or bang the tools against hard surfaces. Always use Starrett tools for their intended purpose. When finished using a tool, wipe it clean of dirt and oils. Avoid marking or nicking the measuring tools as a way of marking a place on the tool. This damages the tool, and even though the initial damage may be inconsequential, it can accumulate. Eventually your tool will have been too damaged to be useful, even if there was no one catastrophic incident.

Create a special place for the tools and be sure to put the tool back in their place when finished using the tool. Proper care of one’s tools ensure that they will remain accurate and useful for a long time.

Starrett Tools

Starrett tools can be found through a number of different distributors including McMaster Carr and Grainger. If a customer has a specific product they are looking for they can call Starrett Company and ask for assistance with finding a local distributor that sells the product. Starrett can also repair and calibrate its precision tools at several of their distributor’s facilities. Simply call into the Starrett customer service center or visit the Starrett website for a list of distributors that provide this service.

Posted in Misc ToolsTagged Grainger tools, McMaster Carr tools, Starrett catalog, Starrett combination square, Starrett punches, Starrett tools, Starrett tools for sale

Powerbuilt Tools Guide: Wrenchs, USA, Warranty and Reviews

Posted on November 21, 2011 by Jeremy4 Comments on Powerbuilt Tools Guide: Wrenchs, USA, Warranty and Reviews

Powerbuilt tools are the some of the best tools available on the market today. They enjoy a huge popularity the world over and are specifically designed while keeping the needs of customers always at the forefront. Alltrade Inc., manufacturer of Powerbuilt tools, ensures that their tools not only measure up to but in fact go beyond the quality standards of the industry set forth by the American National Standards Institute (ANSI.) The company has successfully managed to gain the trust of its customers and has become the favorite and the most used brand in the market.

Recommended Product

[easyazon_infoblock align=”center” identifier=”B003ULZGFU” locale=”US” tag=”toptooltips07-20″]

[AutoCompleteZon id=’3′]

Powerbuilt caters to the millions of clients in the industrial, trade and do-it-yourself sectors. The broad range of tools includes tools, cabinets, power tools, and power sockets. The information about the company and any of the products can be easily obtained by their official websites which are currently specified for the customers for Australia, New Zealand, United Kingdom and Taiwan. Consumers from other countries can also place their orders on these sites. Moreover you can also visit the website of the all trade firm that handles all the trading of the Powerbuilt tools.

Powerbuilt Tools Warranty

The reputation and the quality of products a company can be judged from the duration of warranty it provides. And when it comes to Powerbuilt what can be better than a lifetime warranty on most of their products? This warranty only holds for manufacturing defects in the product, not for any damage or wear and tear caused by misuse and abusive handling. This is among the main reasons their customers trust the quality of the company; Powerbuilt stands by its claim of manufacturing the best products and agrees to repair or replace the product if ever the need arises.

However, certain products such as the lift equipment, toolboxes, and roller cabinets have comparatively shorter warranties.

Powerbuilt Tools United States of America

America proves to be the main and the biggest market for the Powerbuilt tools, especially because they are built according to the standards set by the American government. This is done by the guidelines given by American National Standards Institute. Powerbuilt gives its best effort in order to make sure the finished products are always better than the quality required. As a result, Powerbuilt tools can be found in almost any professional or hobbyists garage or workshop. Their durability, quality and reliability, and of course the aforementioned lifetime warranties, go to make Powerbuilt tools and products among the most popular within the USA.

Recommended Product

[easyazon_infoblock align=”center” identifier=”B003ULZGFU” locale=”US” tag=”toptooltips07-20″]

[AutoCompleteZon id=’3′]

Powerbuilt Torque Wrench

Powerbuilt torque wrenches are specially manufactured with steel alloy components so that customers can work without worrying about their strength or durability. For the ease of operation, the torque wrench produces a clicking sound once it has reached the pre-set torque. Its specialty is the unique torque limiting feature included in the wrench. This feature cannot be obtained from any other brand as it is exclusively patented by Powerbuilt tools. The benefit that customers get from this that it minimizes friction, making your task effortless and safer, not to mention reduces the risk to your equipment due to misuse or overstressing. This torque is always dependable and can be used for rough tasks too, even in situations where the temperature goes as low as -20°C and as high as 50°C. Moreover, the ratchet head can be operated in both directions, clockwise and counter-clockwise, thus making this wrench usable regardless of the operator’s handedness.

Although the operation manual is supplied with every torque wrench sold, you can easily learn how to operate it from these online instructions.

You can find the Powerbuilt torque wrench in many places, both online and in store, but you’re almost guaranteed the best deal by ordering this tool through Amazon. Different prices are available depending on the diameter and range of the torque. Complete specifications of all the models are also present, as well as customer reviews and recommendations regarding this torque wrench. The adapter for the Powerbuilt torque wrench is also available so that the wrench’s display and batteries can be charged easily.

Powerbuilt Hand Tools

A special range of hand tools is also available for craftsmen of all levels of skill. These items include hack saws, jaw pliers, mini-pliers sets, pivot jaws, screwdriver sets, nose locking pliers, shear sets and so many more for precise and efficient working. These items are available in all sizes, in sets as well as separate single pieces.

All the manual tools are durable as well, being made of a rust resistant, strong steel alloy that does not oxidize easily. These handmade tools are available at comparatively lower rates than those for the more advanced users, thus making these basic tools easily affordable for all types of craftsmen. All these items can be viewed at Amazon; you can always check out the customer reviews for these types of tools as well. You can get so much more information than just product descriptions after reading only one or two reviews from previous purchasers of Powerbuilt products.

Powerbuilt Versus Other Brands:

Powerbuilt is relatively cheaper than other comparable products, which makes their purchase more affordable for you. Moreover, the lifetime replacement warranty is not a small benefit to get when it comes to tools. The tools are also safety prone and if used according to the instruction manual will result in no damage to either the tool or the operator. Special features like that in the torque wrench are also added in certain tools which are uniquely patented for Powerbuilt, making this brand the only option to get if you want to take advantage of these innovative features. Powerbuilt is also the only brand of tool manufacture that offers such large range of tools, including both manually operated hand tools and the electrically powered, heavy-duty ones.

Powerbuilt Tools Review

The main highlight that customers appreciate most about Powerbuilt tools is that they never refuse to replace any item and customers can pick a new product of their choice. Moreover, one reviewer also said while praising the tools that, “The Powerbuilt tool set is great to have in the car or truck because it doesn’t take up space and if you need a socket or screwdriver or wrench at home or on the go you will find it in the powerbuilt mechanics tool set I would recommend this tool set to anyone so bye one or as many as you need today its worth every dollar.”

Some of the customers also said that they were happy with the sturdy quality of tools, which take up less space and can easily be placed in their case once the task is complete. Along with this, some customers also say that the reason they chose Powerbuilt was because it cheaper that the other brands making this brand easily affordable, despite its upper-end of the scale quality and durability.

Powerbuilt indeed provides the best tools!

Recommended Product

[easyazon_infoblock align=”center” identifier=”B003ULZGFU” locale=”US” tag=”toptooltips07-20″]

[AutoCompleteZon id=’3′]


Posted in Misc ToolsTagged compare Powerbuilt, Powerbuilt hand tools, Powerbuilt tools, Powerbuilt tools review, Powerbuilt tools USA, Powerbuilt tools warranty, Powerbuilt torque wrench

Kennedy Tools Guide: Customer Service, Catalogue and Manufacturing

Posted on November 20, 2011 by JeremyLeave a comment on Kennedy Tools Guide: Customer Service, Catalogue and Manufacturing

Generally, the word tools may have different connotations for different people or professions. It may be part of a machine, carpentry or even apparatuses that can be used to produce an item or achieve a task to be done. Although the word tool has a broad description and may touch the different improvements and inventions in life, still tools have become a part of each and everyone’s day to day survival.

When it comes to creating state-of-the-art tools, as well as tool dependable storage, Kennedy Manufacturing is known to be one of the longest lasting tool and tool storage companies, having succeeded at the top of this industry for almost 100 years and counting.

Well Known Kennedy Products

The evolution of Kennedy tools and toolboxes has made Kennedy Manufacturing Co. one of the most trusted and well regarded companies to produce and manufacture high quality standard tools and storage chests, which are now widely used among hobbyists and professionals alike. One of its most famous and popular products, having already proven its worth for effectiveness and durability, is the line of Kennedy toolboxes, perfect for storing a wide variety of tools.

Kennedy Tool Storage

Basically, tool storage units are the main thrust of products that Kennedy Manufacturing provides its customers. Kennedy offers many different kinds of tool storage chests that can cater any type of tools an individual has such as mechanical tools, carpentry tools and even medical tools. Between their steel tool chests, roller cabinets, modular storage cabinets or tool storage, the Kennedy line of products has it all.

For instance, in commemoration of its century of services, this year Kennedy Manufacturing is offering limited edition tool storage products such as the Canopy and Roller Cabinet and the 7 Drawer Machinist’s Chest to its valued customers. Yet, with regards to its array of products, more information and product details can be reviewed in the Kennedy tools catalogue, which offers consumers several different types of product catalogs in PDF files.

Kennedy Toolboxes

Out of all the product lines of Kennedy Tools, Kennedy toolboxes are easily the top notch product available on the market today. These toolboxes provide guaranteed performance and durability when it comes to an array of both innovative and classic designs. Kennedy storage products are known, not only within the United States but worldwide as well, for their superior quality, security and durability.

Kennedy Professional Tool Box

Perhaps one of the well-known toolboxes for storage of both Kennedy tools as well as any other brand is the Kennedy Professional Toolbox. This product’s features provide a durability that can sustain years of solid use. With its more than sufficient storage and concrete construction, this type of toolbox will surely meet the standards of even the most demanding professional out in the field. With its 3 variations of size, the needs and requirements of each individual user can and will be completely achieved, whether they’re in need of something smaller and more compact for a personal workshop or large and expansive for a garage or jobsite.  Other features of this product also include:

  1. Sizes to choose are available between 20 and 24 inch models with a length of 25 inches, a width of 10 inches and a height of 9 inches.
  2. It also includes a removeable steel tray with dividers for your hard to store socket sets, which provides an ample space for storage.
  3. The steel design is indestructible due to its chip, ding and dent-resistant powder-coat finish in a brown, wrinkled texture.
  4. The steel handle is coated with vinyl and is designed to be very comfortable to carry.
  5. Lastly, tools are safe and secured for it closes securely using chrome lift latches that cannot be easily opened.

For more data and details regarding the different Kennedy tool box reviews and prices, this tools website provides an array of toolboxes that consumers can definitely use to browse through products and read the customer reviews thereof. As for problems, suggestions or inquiries, consumers can contact the Kennedy Manufacturing customer service website.

Senator Toolboxes

As a major competitor to Kennedy Manufacturing, Senator Tools has its own toolboxes for sale on the market. Their line of products includes the Senator 14 Drawer Superwide Lock On Red, which comes in a scratch and dent resistant red or blue powder-coat finishes. There is the more typical storage unit that features five shallow drawers and two deep ones; this Senator toolbox also features Thermo Plastic Resin (TPR) castors as well as a center based locking mechanism to ensure the safety and security of consumers tools within this toolbox. While Senator toolboxes are a less well-known brand, they provide high quality, durable product that gets the job done.

What Makes Kennedy Manufacturing the Best Available Tools and Tool Storage Company?

For decades, Kennedy Manufacturing tools and toolboxes have been considered as among the best in high standard quality tool storage in America. The biggest difference between Kennedy tools and toolboxes lies in the quality of materials used in their construction, which contribute to the strength, durability and sustainability of their products. Since toolboxes are the top selling products of Kennedy Manufacturing, here are some of the useful tips that can be found in www.ehow.com regarding the process of taking good care of your tool storage unit to ensure its continued good condition and function.

  • Basically, the most important factor in taking good care of toolboxes or tool storage units is to clean them constantly. Dirt and moisture on or in tools and toolboxes can make the metal storage components rust and weaken, as well as look just unkempt.
  • When cleaning your toolbox always make sure to first remove all tools from within, in order to gain easier and wider access to ALL areas both in and out of your toolbox. . Also, include the tools in cleaning for some them may contribute to the dirt and rust in your tool storage unit.
  • Always put the toolboxes or tool storages in a clean and dry place to avoid the moisture that can contribute to the formation of rust, which makes the metal difficult to lift or move. Also, always remember to grease the toolboxes as well as other tool storages in order not to stack up due the rust.

Kennedy Manufacturing has provided state of the art toolboxes and tool storage units that are famous worldwide for their commitment to customer satisfaction and convenience.

Posted in Misc ToolsTagged Kennedy customer service, Kennedy manufacturing, Kennedy tool storage, Kennedy toolboxes, Kennedy tools, Kennedy tools catalogue, Senator tools

Pittsburgh Tools Guide: Torque Wrench, Lifetime Warranty, Quality And Craftsman Tools

Posted on November 7, 2011 by JeremyLeave a comment on Pittsburgh Tools Guide: Torque Wrench, Lifetime Warranty, Quality And Craftsman Tools

A torque wrench is a highly essential tool, not only for mechanical engineering departments but also for most jobs related to automobiles. Torque wrenches were initially invented in the year 1918 in New York City, used for the tightening of bolts and nuts. Whenever the precise application of a specific torque is essential, torque wrenches are best option.

In the field of torque wrenches, Pittsburgh Tools has proven to be the best in quality, and they’re trusted by millions of users. These tools are loaded with heavy duty cams and entrusted pawl mechanism systems that have been very useful for home users. With torque ranging from five foot-pounds to four hundred foot-pounds, most of the torque can be delivered by using wrenches from Pittsburgh Tools. They not only provide torque wrenches that can be used in the reverse direction but also those which are handy enough to use with ease.

Types of Torque Wrenches

If we take a look at the varieties of wrenches available worldwide the mostly used will be:

  • Beam Type
  • Deflecting Beam
  • Clicker or Ratchet
  • No – Hub Wrench
  • Electronic type Wrenches
  • Angle Wrenches
  • Mecha-tronic Torque Wrenches.

Among the variety of available torque wrenches the most commonly used types are the beam wrenches and clicker wrenches, although the demands for mecha-tronic wrenches are increasing day by day. Pittsburgh Tools has tried to provide their customers with a wide variety of tools while also keeping in account the varying trends of the market.

Range of Torque Wrenches

Although there are many varieties of torque wrenches supplied by Pittsburgh, the most popular of these are:

  • ¼” Drive, 20 to 200 in. lbs: This is a high quality torque wrench used most commonly, by both experts and rookies. The torque ranging from five foot-pounds to eighty foot-pounds makes it flexible enough to be used for various jobs. The ability to use this wrench in the reverse direction with length 14” – 1/4” makes it handy for use in different projects. It can provide accuracy within +/- 4%, which is appreciable in the case of a mechanical torque wrench.
    • Range of Torque: – 20 to 200 in. lbs.
    • Type: Reversible Click – Stop or Click – Release Type.
    • Construction: – Chrome Vanadium Steel.
    • Locking Mechanism for securing setting.
    • Price Range on Amazon: – $28.99

·         3/8″ Drive Torque Wrench Clicker: The latest 3/8 inch drive torque wrench from Pittsburgh Tools is a clicker type wrench which automatically clicks and breaks free when the required torque is achieved. It is a stock part in Harbor Freight Tools, showing how popular this type of wrench is.

  • Range of Torque: – 5 to 80 inch-pounds
  • Type: Click – Release Type.
  • Construction: – Chrome Vanadium Steel with milled knurled handle.
  • Equipped with: – Sturdy molded storing case.
  • Price range on Amazon: – $17.97
  • 1/2″ Drive – Reversible Type: It also has the heavy duty cam and pawl mechanism and has a reversible type 1/2 inch drive. With a precise accuracy of +/- 4% it is quite an accurate tool for critical use.
    • Range of Torque: – 20 to 150 inch-pounds
    • Type: Click – Reversible Type.
    • Length: – 18 inches.
    • Price Range on Amazon: – $19.49
  • Half inch Extendable Ratchet: A handy ratchet with half inch drive. It can handle the torque varying from 2ft.lbs to 400ft.lbs. Extremely useful for difficult to reach jobs. A versatile solution for many problems.
    • Specialty: – Six locking positions
    • Type: Heavy duty Chrome Vanadium type.
    • Length: – Extendable from 12 inch to 17 inches.
    • Gear: – 72 Tooth gear action.
    • Price Range on Amazon: – $29.99

Other Competition in The Business

Another big shot in the business is Craftsman Tools. They have been a competitor in the wrench making business for a long time. With the wide variety of tools, especially high quality torque wrenches, Craftsman Tools has become a popular brand name in the United States as well as the United Kingdom.

Stanley Tools also has a good reputation in the manufacturing of hand tools for mechanical work. They provide a wide range of tools including measuring tools, finishing tools, fastening tools, flashlights and wood-working tools.

Guidelines for Purchasing a High Quality Torque Wrench

Whenever you’re looking to purchase a torque wrench, make sure to follow these guidelines to get the best quality for of your money:

  • The most important thing to check for in a torque wrench is the ACCURACY of it. Moreover, it is very important that the equipment maintains its accuracy for a long time. You shouldn’t have to get it re-calibrated every month or two; it will be a waste of money then. For your good, all tools from Pittsburgh come with a lifetime warranty. You can put your trust in any product from this brand name.
  • Make sure that you check for the certificate of calibration to clear this doubt from your mind. Each torque wrench from Pittsburgh is accompanied with a certificate of calibration and tested for quality as per the standards.
  • It is very important to know how to use a torque wrench in the proper manner. You can learn it through this video, which will be very useful to watch before using this equipment.

Reviews about Pittsburgh Tools

It is essential to know that the most important part of a good purchase remains in the quality of the product and the amount you pay for it. With the lifetime warranty on the products provided by Pittsburgh Tools, these are understandably the most wanted tools in the industry. Remember the cheaply made and low quality products can be inexpensive in the short run, but will never last forever.

These tools come with a life time warranty, which is why they are trusted by so many customers around the globe. The craftsmen have rated this brand the number one amongst its competitors. They are affordable, they are high quality and they come with a lifetime warrantee.

Posted in Misc ToolsTagged craftsman tools, pittsburgh tools, pittsburgh tools lifetime warranty, pittsburgh tools quality, pittsburgh tools review, pittsburgh tools torque wrench, stanley tools

Ironworker Tools Guide: Safety Harness, Klein Tools & Armstrong Tools

Posted on November 7, 2011 by JeremyLeave a comment on Ironworker Tools Guide: Safety Harness, Klein Tools & Armstrong Tools

An ironworker is a person whose job is to construct, or sometimes destruct, the structural framework of buildings, bridges, towers, stadiums and other places using irons and other ferrous and non-ferrous materials. It is very necessary that they erect the structure/framework following the engineered drawings so that any possibilities of accidents are ruled out. For the ironworkers to perform their duties well, they need to use the proper ironworker tools.

Ironworker may also refer to a type of machine which is used punch holes, notch and shear the steel plates. These machines generate force using hydraulic systems or mechanical advantage. They are made up of heavy steel which can withstand the high force that is generated while in use. They are classified into different types on the basis of their weight and size. Ironworker machines are extensively used in commercial manufacturing units as they help to reduce the amount of man-hours, as much effort is required to punch or cut through the steel. So an ironworker operator is required to operate the mechanism of ironworker machines.

There are various types of tools that are required by the ironworker operator to carry out his works. Ironworker tools are of different types as per the needs of the work.

Ironworker Tools Safety Harness

Safety harnesses are a type of protective equipment that is used for the safety of the ironworker workers. The ironworker safety harnesses are full body harnesses that are custom-made, keeping in mind the diverse jobs of the workers. FallTech’s line of full body harnesses are of seven types – ComforTech, WeldTech, Journeyman, Tradesman, Foreman, Contractor and FT Basic. Each of these has their own unique attributes, specific to the function they’ll be used to perform. They come in different configurations and sizes for different workers of different jobsites. They are handmade in the USA using the best quality polyester and aramid webbings. The finishing touch is given by proprietary hardware and accessory parts. So they are better than other harnesses available on the market today.  Another range of safety harnesses are made by SALA, also an American company. Their Delta No-Tangle Harnesses are among the best, as they are very comfortable for the workers. The other harnesses SALA offers are ExoFit Ironworker Harness, ExoFit Construction Harness, ExoFit Tower Climbing Harness, ExoFit XP Standard Harness, and ExoFit XP Construction Vest Style Harness. These are all custom-made for different classes of ironworker. If you want to buy some harnesses you can get in touch with ironworkertools suppliers as they sell genuine products.

Klein Tools

Klein Tools, Inc. is an American tool company founded in 1857 by Mathias Klein. In its early days, the company started off with manufacturing and selling pliers only. After the passage of generations, they started manufacturing and selling a wide variety of ironworker tools, estimated to be more than 3,800 types. They sell hand tools like pliers, screwdrivers, nut drivers, measuring tools, hammers, and many more, plus electrical tools like voltage testers, continuity testers, fish tapes, insulated hand tools, benders and other electrical tools. Klein also produces protective and safety equipment like hard hats, goggles, face shields and hand gloves. They sell sheet metal and construction tools like bolt cutters, cable cutters, knives, blades, saws, sharpening tools and scissors. Klein Tools also sell the highly acclaimed products of the Journeyman series, arguably of the best quality and are made with innovative designs. There are many more tools that are sold by this company. You can buy these tools from one of their many distributors or you can also opt for used ironworkers tools.

Armstrong Tools

The Armstrong Tools company was founded way back in 1890 by four brothers who were the sons of an immigrant blacksmith from Scotland. In the years following its formation, Armstrong Tools sold bicycle parts, in addition to tools and equipment that are used to manufacture bicycles and repair them. Five years later, they started manufacturing lathe tool holders and after the next five years they started making ironworker tools.

Armstrong Tools manufactures and sells a wide range of products like storage containers for different types of tools, socket sets, hand sockets and drive tools, impact and power sockets, accessories and sets which comes in different sizes for different requirements. They also sell different industrial wrenches sets which come in different combinations and types, and are used for different purposes, are adjustable and convertible as per the needs of the user. Armstrong Tools Company also offers some other ironworker tools like different torque wrenches, screwdrivers and nut drivers, and a wide variety of pliers and snip tools. There are other tools you can buy from ironworker tools suppliers like chisel sets, punches, hammers and pry bars, and other tools like hacksaws, knives and different types of pullers.

Rod Buster Tools

When you hear rod buster tools for the first time, you may think of it as a tool that are used to bust rods or a person whose job is to break down rods, but this is not actually the case. A rod buster is actually a construction site worker who secures metal bars and rods into concrete to reinforce the building so that it does not collapse.

A typical rod buster must possess some skills to be effective and safe when doing this difficult task. Physical strength is also very necessary for a rod buster as he has to manage the heavy metal tools. He must understand how to use the tools and it is necessary that he has some workable knowledge of geometry. If a rod buster lacks geometric skills, he may bend the bar too little or too far and it may cause destroy the chances for the durability of the building. So geometry skills are more important than stamina.

Before a rod buster is appointed for work, his certifications may be considered for the job. It is required that he has some basic idea about rod-bending techniques, though on-site training is provided to him. Rod busters work closely with contractors to plan out the structure of the building. The rod buster is responsible for securing the skeleton of the building structure so that it doesn’t cause any accidents.

Posted in Misc ToolsTagged armstrong tools, ironworker tools, ironworker tools saftey harness, ironworker tools suppliers, klien tools, rodbuster tools, used ironworker tools

Rockwell Woodworking Tools Guide: Jawhorse, Sonicrafter & Blade Runner Equipment

Posted on October 23, 2011 by JeremyLeave a comment on Rockwell Woodworking Tools Guide: Jawhorse, Sonicrafter & Blade Runner Equipment

Old timers will remember the Rockwell woodworking brand with some nostalgic effect as to its durability and dependability. Most who have encountered the brand will only have positive things to say about its functioning and efficiency. During high school workshops this woodworking tools can be found as one of the machines that students use to learn in order to create their projects and develop skills at the same time. But as the years go by the tools seem to have disappeared from the shelves of the shops who are selling the product that is until 5 years ago when a brand new Rockwell woodworking tool rolled out from the manufacturing plant of Positec Tool Group.

The Positec Tool Group has purchased the brand name from the original owners but still carried the tradition of creating dependable woodworking tools. To augment their commitment towards dependability and durability the company has offered batteries for life in their Rockwell cordless series of woodworking tools. They are serious about this program because they believe that it is a complete waste to throw away a perfectly fine tool when the battery is dead. For paying the shipping cost of only six dollars the company will replace the battery of the cordless tool for free and the old batteries do not have to be returned but simply to be disposed of responsibly. More of this story can be found on the website http://woodworkersjournal.com/Ezine/Articles/Rockwell_Tools_New_Company_Same_Quality_from_a_Nam_7292.aspx.

Rockwell Woodworking Series

The Positec Tool Group has practically revived all of the Rockwell woodworking tools. The products that are at the moment is successful in its launching is the Rockwell jawhorse and the Rockwell Sonicrafter. The jawhorse is considered to be the only workstation that a person will ever need. It has the ability to exert one ton of clamping force and is purely made from solid steel. It has an easy portable folding design for easy keeping and uses a foot pedal in order for the hands to be free when clamping. The technical details of the jawhorse include:

  • It is equipped with a lock release switch for easy maneuverability of the material being clamped.
  • The jaws have the capacity to open up to 37 inches.
  • It has all terrain stability because of its tripod base.
  • The Rockwell woodworking jawhorse has only a weight of 43 pounds and will not need any tools when to be folded and tucked away for future use.

The sonicrafter is a multipurpose tool that can be used to address various tasks without the disadvantage of cluttering the working area. This Rockwell woodworking equipment has the following features that were reviewed at http://www.oneprojectcloser.com/rockwell-sonicrafter-oscillating-multi-tool-review/.

  • The motor has a variable oscillating speed which maxes out at 20,000 per minute.
  • It has a 6 foot cord.
  • It would take only 15 seconds to change the Rockwell blades because of the integrated hex wrench design.

The sonicrafter kit, when purchased includes the following:

  • 1 semicircle Rockwell woodworking blade.
  • A universal End cut blade.
  • With 15 sanding sheets.
  • A sanding pad.
  • A hex key.
  • An adapter.

The performance review of the Rockwell woodworking machinery is that the operator will not experience a kickback, it can work in tight places, and will cut solid and rigid materials. The strongest suit of this Rockwell multi tool is its ability to perform precision cutting of the material.

Other Rockwell power tools like the Rockwell blade runner is also a must have by professional woodworkers and amateurs alike. This multipurpose tool has the ability to cut straight lines and curves the materials which include ceramic, wood, tiles, plastics, and even metals. With the weight of just 17 pounds this machine can be set anywhere either in one’s own shop or the jobsite itself. It is equipped with a T shank jigsaw blade and can be changed in less than 3 seconds. This Rockwell woodworking series tool can easily be attached to any vacuum for easy cleaning. The specifications of this brand include:

  • Power voltage of 120 to 160.
  • 5.5 amperes.
  • No load speed limit.
  • A portable Rockwell table size of 17 inches by 15 and ¾ inches.
  • It has a stroke length of 7/8 of an inch.

Even though that there are new owners of the Rockwell woodworking power tools the Rockwell bandsaw was not revived in the production line. Most of the products that are available for sale are those that are owned by private individuals or companies who have already no use of the saw. The durability and dependability of this product even though it has already become a sort of novelty cannot be dismissed. Www.ebay.com also carries perfectly well conditioned bandsaws of this brand although it has a very limited warranty which is mostly 7 days. Nevertheless if one has a defective bandsaw of this brand the parts of the can be bought from this site and may be utilized for repairing the defective saw.

www.amazon.com carries the Rockwell scrollsaw as part of its product line sold on the market. The technical details of the machine include that it is light-weight and easy to transport, with table bevels that ranges from zero to 45 degrees.  Additional specifications include a variable speed for precision cutting, an on board dust blower with a dust port for extraction.

The product is being described as a great value in one’s personal home workshop. This Rockwell woodworking product is guaranteed to give accurate clean cuts with its 16 inch scroll and variable speed of 4/5 inch stroke. A positive review it received was that it is a good saw for a good price and the company gives good service to its customers. The critical review it garnered was that the air hose coupler was damaged on the first day of operation and the machine was vibrating a lot. The foot that holds the stock is also weak and can bend very easily was the claim of another user. But despite this all in all the machine received a rating of 3 and 5 stars from its reviewers.

Posted in Misc ToolsTagged rockwell bandsaw, rockwell blade runner, rockwell blades, rockwell jawhorse, rockwell multi tool, rockwell power tools, rockwell scroll saw, rockwell sonicrafter, rockwell table, rockwell woodworking, rockwell woodworking equipment, rockwell woodworking machinery, rockwell woodworking tools

Dremel Tools Guide Plus Rotary, Oscillating And Multi-Tool Reviews

Posted on October 23, 2011 by JeremyLeave a comment on Dremel Tools Guide Plus Rotary, Oscillating And Multi-Tool Reviews

Dremel tools are known for their superiority and quality, practical applications, functionality, and novel designs. This brand has a wide variety of power tools and specializes in rotary tool creation. Dremel has been manufacturing and creating the highest quality devices for over seventy five years now. Albert J. Dremel was the original founder of the company in 1932 and since then various tools have been introduced on the market all over Europe. In 1993, the company was bought by Robert Bosch GmbH, and today it became a side company of the Bosch Tool Corporation which is based out of Illinois.

Today, its products include compact tool system, a multi-tool system, bench top tool system, hobby line and retired products. Since their tools have ergonomic and versatile designs, craftsmen including glass engravers, woodworkers, case molders, restorers, hobbyists and creative artists prefer them over the other brands. It has also recently added the Dremel glue gun in its line-up along with over 150 kinds of attachments and accessories. Corded and battery-operated or cordless models are all available in both hardware stores and online.

Dremel Rotary Tools

Dremel rotary tools are compact and high-speed hand-held tools with rotating or twisting force which are designed to accomplish several tasks with ease and accuracy. Dremel is the recognized pioneer in rotary tools and the name of the company became synonymous with the tool itself. Most rotary tools are even colloquially referred as Dremel tools, which has become a generic trademark which speaks of it lasting quality and superiority. They have been setting the standard and quality by which all of the other tools are evaluated.

Dremel Oscillating Tool

Oscillating tools are designed for a variety of do-it-yourself jobs like restoration, simple repairs, remodeling or renovation. These tools are even made more versatile if used with a variety of accessories and attachments. If a rotary tool has a twisting or spin-like movement, oscillating tools use fast backward and forward or side- to-side motion. This makes it ideal for cutting, sanding, scraping, grinding, and removing grout among others. With this tool, you can do the aforementioned jobs like a real pro. The Dremel 6300 Multi-Max is a hand held oscillating tool which is already proven for its functionality and durability. It is comfortable to grip and hold even for a long period of usage thus reducing user’s fatigue caused by the vibration. Intricate and detailed jobs, hard to reach edges and corners can easily be reached and done with this particular model.  It can even be used for basic kitchen cabinetry and small furniture.

Dremel Multi-Tool

Dremel is famous for its multi-tool system which is designed for both minor and major projects and tasks.  It is a multi-purpose tool ideal even for beginners and a favorite among expert craftsmen. It features a system of attachments and accessories making it more perfect for all purpose jobs like polishing, engraving, carving, sanding, routing and more. Its 360-degree plunge-cut ability and 90-degree pivoting handle makes these tool a cut above the rest when we talk about precision, easy-control and comfort. Furthermore, it can be used on several spaces and materials such as sheet metal, wall tile, plastic, wood and dry wall. The Dremel 200 series is the ideal multi-tool to get if you are a beginner. It has 125w powerful motor and compatible with a number of accessories, but is not complicated to operate.

Dremel Tools at Wal-Mart

Wal-Mart is the number one Dremel tool merchant online. A wide selection of Dremel tools and accessories are available here with special markdown prices and delivery arrangements. One of the best models available is the Dremel 300-N25 Variable Speed Rotary Tool. The Dremel 300 series models for rotary tools is a versatile power tool which can be used to accomplish several tasks from art projects to basic home repairs. Its adjustable speed control can match any particular job or work that is needed to be done. All of its 25 accessories are also available like comfort grip and other exclusive attachments.

Cheaper Dremel tools can also be availed at Wal-Mart, and in case of breakdown the store offers replacements since Dremel is now owned by Bosch. Some models on sale can be availed through eBay; others can be acquired through bidding on the same online store.

Dremel Tools at Home Depot

Home Depot has a wide selection of top of the line brands like Dremel tools. It offers free shipments, free in-store pickups and free returns. Certain tool models and accessories are also available on its online purchasing like Dremel 8200 – 2/28 Cordless Tool with Free EL456 Pack-in, Dremel 7300-PT 4.8 volt Cordless Rotary Tool Minimite,  1550 wood burning tool, and sanding and cutting attachments.

Dremel Tools Review

Dremel tools have long been known for versatility and power making it a necessary addition to your toolbox. These high performance tools can be assured to be of great help to any creative, repair and remodeling jobs at home. These tools have also been the most recommended gift for men especially during father’s day. It is one of the most preferred DIY tools because it is very easy to use, it is supplied by a wide variety of accessories giving you endless ideas on how to use it. This tool works with supreme balance and control, speed and power which can be used to perfect tasks, and precision that makes it ideal even for beginners.

Since it is affiliated with Bosch, after sales service is also excellent! There are free returns and replacement policies if your newly purchased Dremel tool accidentally breaks down. It should be noted upon purchase however, that Dremel tools are not heavy-duty construction tools. Most frustrations and disappointments happen if the user tries these products on bigger construction jobs like using it on larger nails and cutting large holes in you drywalls and metal sheets. It is not construction equipment so it is naturally not suitable for such jobs; it is mainly designed for DIY jobs. Like all other equipments, no matter how versatile it is, it has limitations but it is guaranteed to deliver the task that is it designed to do.

Posted in Misc ToolsTagged cheap dremmel tools, dremel oscillating tool, dremel rotary tool, dremmel multi tool, dremmel tools, dremmel tools at home depot, dremmel tools at walmart, dremmel tools for sale, dremmel tools review, dremmel tools uk

Clamp Strainer Guide: Fencing Tools, Crimp Sleeves, Ezepull And Ezecrimp Reviews

Posted on September 4, 2011 by JeremyLeave a comment on Clamp Strainer Guide: Fencing Tools, Crimp Sleeves, Ezepull And Ezecrimp Reviews

Clamp strainers are most commonly associated with creating a solid and sound metal fence, however the word strainer can have several other connotations.  These variations will sometimes become confusing, especially if the buyer has no idea of their uses and what form of strainer is appropriate for their task. Some strainers works better that others, some are easier to use and there are those that can even be tedious sometimes. For the most part clamp strainers can be used by anyone, however if you are attempting to work on a fence that is electrically charged it would be best to seek additional assistance. All in all a product that works and can provide the best quality and durability must be the one that will be sought after to get the job done properly.

Purposes of Strainers

Strainers are usually associated with the sole purpose of food preparation, like filtering flour for baking cakes or straining the solid particles of tea before drinking.  Sometimes these home use strainers are also used in making jams, baby food and sauce. The truth of the matter is this is only one type of strainer, and not the type that we will be focusing on today.

Clamp strainers are used to help professionals and homeowners create a fence that is durable and with withstand all elements.  As most fences are constructed of wire it can be difficult to ensure, by hand, that your fence is strong enough to withstand escaping animals or prevent invading intruders.  For that reason a clamp strainer is used to ensure that your fence is taunt and that there is no room for manipulation after it has been set.

Strainers are most commonly constructed out of metals, such as stainless steel. They are often constructed out of materials that are durable and can withstand extreme temperatures, depending on the type of strainer.  Take caution in purchasing a clamp strainer to be used on an electric fence as some are not equipped to handle the voltage and it could travel to the handler. Ask a hardware specialist which tools are appropriate for working with fences that are electric.

A strainer could mean to filter or refine, or the other meaning for the word is to tighten. The products that are produced to tighten are called in line fence strainers or simply metal clamp strainers. The specific purpose of fencing is to keep the predators away from livestock or farm products that are still in the field, and to keep out intruders. For those professionals who stake their livelihood on protecting their livestock it is important to ensure that fences are secure and made of only best equipment possible, including a good clamp strainer.

Clamp Strainers

Here are some examples of clamp strainers one can use in creating a perfect tension of the wires that are used for fencing.  900mm Sheep Strainer Boards & Sets is a complete set of fencing materials that includes all accessories including a clamp strainer. The different types of fences it can create will depend on the preference of the buyer like the electric fence, mesh wire, and fencing panels. More information about the product is available at www.video.ezinemark.com.

Rockler Universal Fence Clamps which is available at www.amazon.com and is one of the clamp strainers used to protect a fence from breakdown. The wide footing of the product will not damage the surface of the original fence where it will be attached. This clamp strainer will not be in the way while working because it does not reach over the top of the fence when being placed. The product has a lot of uses and can almost fit all standard size fences.  Consumers who have used this clamp strainer say that it is easy to operate and reliable compared to tools of its same caliber.

While these are just two common fence clamps, there are fence clamps suitable for all your fencing needs, and each at various price points.

Other Accessories and Clamp Strainer Tools

Tru Blu fencing equipment is also responsible for manufacturing some of the most high quality clamp strainers on the market, and providing clamps for every job. The company supplies professionals with everything from the actual clamp strainers to wire dispensers and crimp sleeves. Here is an overview of what the company has to offer to assist you with all your fence making needs:

Crimp sleeves

These aluminum built crimp sleeves are ideal in the construction of a strong and sturdy fence.  They are a better alternative to the typical figure and knot meeting that is done when creating a wire fence.  These crimp sleeves are only suitable however for wire that is 2.5 mm thick.

Ezepull Fencing tool

This four in one tool can do the work of many.  It can act as a crimp joiner, staple puller, wire cutter, and it can even assist in wire stripping for fences that are going to be electric.  With so many uses a tool like this has to be easy to handle and small so that it can fit into most fencing.  Consumers who have purchased the Ezepull agree that this tool is the ultimate sidekick in creating fences.

Ezecrimp Fencing tool

This multifunctional fence-making tool can serve a variety of purposes when creating a solid enclosure. Not only can it join wires, but it can be used to cut off excess at the tips of a wire and strip off cable from an electrical fence.  Like the Ezepull fencing tool the Ezecrimp can do the work of many and is raved for being a great all in one tool to create a fence.

The Right Clamp Strainer

It is important to understand all your needs before purchasing a clamp strainer.  There are some brands which offer strainers with different features and of different qualities, so choosing the right one can either save you money or another trip to the hardware store.  You must be certain that you are choosing the right clamp strainer for your fence-making needs.

Posted in Misc ToolsTagged clamp strainer

Scissor Jack Reviews: Electric, Motorcycle, RV And Small

Posted on July 2, 2011 by JeremyLeave a comment on Scissor Jack Reviews: Electric, Motorcycle, RV And Small

A scissor jack is a mechanical lifting jack that is basically a parallelogram whose diagonals are connected by a screw.  By turning the screw, it draws the two diagonals closer, or pushes them apart.  This inversely forces the opposite diagonals together or apart.  Mechanical jacks like this are usually rated for a maximum lifting capacity, typically rated in tons.

This type of jack is typically placed in automobiles for changing tires because they are lightweight and compact.  This type of jack is used in other areas, as well, such a motorcycle jacks and RV leveling.  There are even electrical versions.

Motorcycle Scissor Jack

A motorcycle scissor jack is the same type of jack as an automotive one, except that a motorcycle jack typically has a flat platform at the top with some sort of griping surface.  The jack is typically used for removing tires.  The large flat platform is used because it is difficult to find a small balancing point  on a motorcycle.  The large surface helps keep the bike from tipping over while lifted, and the gripping surface helps keep it from sliding off of the jack.

Electric Scissor Jack

The electric scissor jack is the same as a mechanical one, except for one major difference-a motor that turns the screw instead of relying on your power.   In many cases, the motor is a 12V motor with a connector designed to be plugged into a cigarette lighter.  Several of them also have clamps to be connected directly to the battery terminals.

RV Scissor Jacks

RV Scissor jacks are typically on each corner of the RV, mounted to the bottom of the RV, and pressing down towards the ground.  These jacks are used to both stabilize and level the RV while it is parked.  These jacks can be your typical mechanical jacks, where you would have to get out a wrench of some sort to extend them.   In the nicer RVs, these jacks will be electric, with a separate switch for each one, so you can extend or contract the jacks with a simple press of a button or flip of a switch.

Amazon.com Products

The most popular mechanical scissor jack found on Amazon.com is a Torin model T10152.  It is rated at 1.5 tons, which is a typical and sufficient rating for automotive use.   This inexpensive mechanical jack sells for just $16.99.   The manufacturer tests each jack for reliability and safety.  This jack has a low profile when fully collapsed at only 3.75”.  Fully extended, this jack reaches 15.4”.  This jack would be a practical tool for most cars, but does not have a tall enough reach to be used for SUVs or trucks.

Despite the fact this jack is rated the most popular on Amazon.com, not one person has left a review.  This could be good news, since most of the time people will typically leave reviews when they are upset or disappointed in a product more than when they are happy with it.

The most popular motorcycle scissor jack found on Amazon.com is the ManSpace 1,100lb Motorcycle Jack.  This jack is a modest $63.79, which is a great deal for this 1,100 lb capacity low-profile jack.  This simple jack rests at only 3 ½” fully compressed.  One key to having a useful motorcycle jack is having one that is low enough to easily slide under the fame of the bike.  This jack rises to almost 16”, giving you plenty of lift to allow you to remove tires, drain oil, change the chain, or anything you may need to do, while raising the bike to a comfortable working height.  This jack will also work nicely when slid under a lawnmower to raise it up for service.

Unfortunately, this product has no customer review on Amazon.com, either, despite rating as the most popular motorcycle scissor jack.

The first electric scissor jack you will find on Amazon.com is the 2200lb 12 volt Generic brand.  This high-capacity jack sells for only $79.99.  This all-steel model is sturdy, and protected from corrosion with a powder-coat finish.  This model is equipped with a 12’ cord and a cigarette lighter adapter so that it can reach all four corners of the vehicle.  It is controlled with a remote that has a built-in LED flashlight so you can raise and lower the vehicle from a safe distance and see what you are doing at night time.  This jack comes with a hard carrying case to keep it compact and neat when stowed.

To keep from overloading your car’s circuit, this jack has a built-in circuit breaker.  It also has extra fuses, in case you do overload it, so that you are not stuck if you blow the fuse.  The rotating pawl has protective pads to defend against scratching your vehicle, and is designed to fit well on your frame or axle.  This easy to operate jack is great for anyone who is not physically able to raise or lower their vehicle using manual power.  It will extend from fully compacted to fully extended in 45 seconds, which is quicker than most people could raise a vehicle with a manual jack (not to mention, it is a WHOLE lot easier to push a button than to actually turn a wrench).  The maximum lift height is 13 ¼”, which is not high enough to lift a truck or SUV, but is sufficient for most cars.

The reviews of this jack found it to be fast, stable and strong.  It has been reviewed as being well constructed and easy to use.

Summary

The scissor jack is a simple, compact, easy to use method of lifting and stabilizing.  The design is simple, has few moving parts, and multiplies the force applied to lift very heavy objects (such as cars) using little applied force.  The compact size and light weight makes it ideal for use in automobiles because it will fit in small places, and is easy to take in and out of the vehicle.  They are also very versatile, as you have seen with the adaptive application as a motorcycle jack and RV leveler and stabilizer.  Hydraulic jacks are large, require maintenance, are heavy, and expensive.  The scissor jack is an inexpensive and perfect alternative.

Posted in Misc ToolsTagged electric scissor jack, motorcycle scissor jack, rv scissor jacks, scissor jack, small scissor jack
Proudly powered by WordPress
Simple White lite RGB Classic
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.Ok